Renumbering Digital pagers:

You must use a standalone transmitter to reprogram digital coaster pagers.

Programming commands are sent over the air and can only be programmed one pager at a time.

Each command must be completed within the first 30 seconds after the pager is placed on/in the charger.

If more than 30 seconds have elapsed return to step 1.

1. Ensure the charger is plugged in.
2. Place 1 pager at a time on the charging base.
3. From the transmitter, enter the OLD pager number, press “ENTER”
4. When the display says, ‘Enter Message’, press “(*) star” followed by the NEW 3 DIGIT pager number, then press “SEND”
5. The pager number will change to the new number. Example: Changing #6 to #127 type 6, then ENTER Key *127, SEND key